// SD/MMC card connection sheme
//                     ----------------
//                    / 1 2 3 4 5 6 7 x| MMC/SC Card
//                    |x               |
//



// dbox2 Nokia connection scheme and driver update by TaGana/2006
//
//     |
//    _----------------------------------------
//   | |        dbox2 tuner                   |
//    ~----------------------------------------
//     |
//     |
//     |        1  3  5  7  9 11 13 15 17 19
//     |        2  4  6  8 10 12 14 16 18 20
//     |


// PA7  = SD_DO = 0x0100 = SD_Card Pin 7   = Modem_CN 14 
// PB19 = SD_DI = 0x1000 = SD_Card Pin 2   = Modem_CN 17
// PB22 = SD_CLK= 0x0200 = SD_Card Pin 5   = Modem_CN 18
// PB23 = SD_CS = 0x0100 = SD_Card Pin 1   = Modem_CN 5 
// GND  =       = Masse  = SD_Card Pin 3,6 = Modem_CN 10
// VCC  =       = 3,3V   = SD_Card Pin 4   = Modem_CN 16 
//
// Also connect a pullup resistor 100 KOhm from pin14 (SD_DO) to pin16 (VCC)
//

// dbox2 Sagem connection scheme and driver update by mgerald21/2006
//
// For Sagem please refer to http://forum.tuxbox.org/forum/viewtopic.php?p=296481#296481
// Maybe someone writes a nice article in the Tuxbox-Wiki? *hint*hint*


// dbox2 Philips connection scheme 
// not supported yet by this driver

** Note: Please be careful you can realy damage your box!
** Nobody issues any guarantee!