//  sd/mmc card connection scheme
//
//                     ----------------
//                    / 1 2 3 4 5 6 7 x| MMC/SC Card
//                    |x               |
//


// dbox2 Sagem connection scheme and driver update by mgerald21/2006
//
//			SAGEM FRONT
//	<- power supply
//
//		1  2  3  4  5  6  7  8  9  10 11 12
//
//
//

// PA9  = SD_DO = 0x0040 = SD_Card Pin 7   = Modem_CN 2  (RxD)
// PA8  = SD_DI = 0x0080 = SD_Card Pin 2   = Modem_CN 1  (TxD)
// PB17 = SD_CLK= 0x4000 = SD_Card Pin 5   = Modem_CN 10 (RTS)
// PB16 = SD_CS = 0x8000 = SD_Card Pin 1   = Modem_CN 6  (RTS)
// GND  =       = Masse  = SD_Card Pin 3,6 = Modem_CN 3  (DTR)
// VCC  =       = 3,3V   = SD_Card Pin 4   = Modem_CN 5
//
// Also connect a pullup resistor 100 KOhm from SD/MMC card pin 7 (SD_DO) to SD/MMC card pin 4 (VCC)


// dbox2 connection scheme for Nokia
//
//     |
//    _----------------------------------------
//   | |        dbox2 tuner                   |
//    ~----------------------------------------
//     |
//     |
//     |        1  3  5  7  9 11 13 15 17 19
//     |        2  4  6  8 10 12 14 16 18 20
//     |

// PA9  = SD_DO = 0x0040 = SD_CARD Pin 7   = MODEM_CN 12 (RxD)
// PA8  = SD_DI = 0x0080 = SD_CARD Pin 2   = MODEM_CN 11 (TxD)
// PB17 = SD_CLK= 0x4000 = SD_CARD Pin 5   = MODEM_CN 2 (RTS)
// PB16 = SD_CS = 0x8000 = SD_CARD Pin 1   = MODEM_CN 6 (DTR)
// GND  =       = Masse  = SD_Card Pin 3,6 = Modem_CN 10
// VCC  =       = 3,3V   = SD_Card Pin 4   = Modem_CN 16
//
// Also connect a pullup resistor 100 KOhm from SD/MMC card pin 7 (SD_DO) to SD/MMC card pin 4 (VCC)
//


// dbox2 connection scheme for Philips
//
// Modem Connector:
//
//			---> power supply
//   2 4 6 8 10 12   
//   1 3 5 7  9 11

// PA9  = SD_DO = 0x0040 = SD_CARD Pin 7   = MODEM_CN 11
// PA8  = SD_DI = 0x0080 = SD_CARD Pin 2   = MODEM_CN 9
// PB17 = SD_CLK= 0x4000 = SD_CARD Pin 5   = MODEM_CN 7
// PB16 = SD_CS = 0x8000 = SD_CARD Pin 1   = MODEM_CN 5
// GND  =       = Masse  = SD_Card Pin 3,6 = Modem_CN 2
//
// Also connect a pullup resistor 100 KOhm from SD/MMC card pin 7 (SD_DO) to SD/MMC card pin 4 (VCC)
// Attention: The Philips modem connector provides 5V only,
// so we connect in series 3 Diodes (1N4007) from MODEM_CN 1 to SD/MMC card pin 4

** Note: Please be careful you can really damage your box!
** Nobody issues any guarantee!